S16 Micro Optical Shaft Encoder

S16 Features

  • Small size (16mm OD)
  • Low Cost
  • Snap-in polarized connector
  • 250/256 to 4,000/4096 cycles per revolution (CPR)
  • 1,000/1024 to 16000/16384 pulses per revolution (PPR)
  • Single +5V supply

See more info below

Configure the S16

S16 Product Description

Restriction of Hazardous Substances

The S16 16mm micro-optical shaft encoder is designed to provide A, B, and Index digital quadrature signals for high volume restricted space applications. The S16 encoder is available with either a bushing or ball bearing system for high speed applications. The shaft torque is designed to provide the feel of a potentiometer for front-panel manual interfaces. The S16 series encoder is connected using a 5-conductor, polarized, 0.8mm pitch connector (Hirose part number DF52-5P-0.8C). The mating cable (see the Cables web page) is not included and is available separately.

Product Specifications

View here or download the specifications

ENVIRONMENTAL

PARAMETER VALUE UNITS
Operating Temperature -40 to 100 C
Electrostatic Discharge, IEC 61000-4-2 ±12 kV
Vibration (10Hz to 2kHz, sinusoidal) 20 G
Shock (6 milliseconds, half-sine) 75 G

MECHANICAL

SPECIFICATION SLEEVE BUSHING BALL BEARING
Max. Acceleration 10000 rad/sec² 250000 rad/sec²
Max. Shaft Speed (1)
(mechanical)		 100 RPM 15000 RPM
Max. Shaft Torque 0.5 ±0.2 in-oz (D-option)
0.3 in-oz (N-option)		 0.05 in-oz
Max. Shaft Loading 2 lbs. dynamic
20 lbs. static		 1 lb.
Bearing Life > 1000000 revolutions L10 = (22/Fr)³ *
Where L10 = bearing life in millions of revs, and
Fr = radial shaft loading in pounds
Weight 0.48 oz. 0.43 oz.
Max. Shaft Runout 0.0015 in. T.I.R. 0.0015 in. T.I.R.
Max. Panel Nut Tightening Torque 20 in-lbs 20 in-lbs
Technical Bulletin TB1001 - Shaft and Bore Tolerances Download

* Only valid with negligible axial shaft loading.

(1) The maximum speed due to electrical considerations is dependent on the CPR. See the E16 product page.

ELECTRICAL

PARAMETER MIN. TYP. MAX. UNITS NOTES
Supply Voltage 4.5 5.0 5.5 V  
Supply Current   18 26 mA no load
Low-level Output     0.4 V IOL= 4 mA, Vcc = 5V
0.1   V no load
High-level Output 4.7     V IOH= 4 mA, Vcc = 5V
  4.9   V no load
Output Rise Time   80 135 ns no load
Output Fall Time   80 135 ns no load
Maximum Output Frequency
250/256 CPR
500/512 CPR
1,000/1,024 CPR
2,000/2,048 CPR
4,000/4,096 CPR
0.2
0.4
0.8
1.6
1.85		    
MHz
MHz
MHz
MHz
MHz		  

PHASE RELATIONSHIP

  • Specifications apply over the entire operating temperature range.
  • Values are for the worst error over full rotation.
  • Refer to the timing diagram below.
PARAMETER SYMBOL MIN. TYP. MAX. UNITS
Symmetry X, Y 150 180 210 °e
Quadrature Z 60 90 120 °e
Index Pulse Width Po 60 90 120 °e
Ch. I Rise After Ch. B or Ch. A Fall t1   10   ns
Ch. I Fall After Ch. B or Ch. A Rise t2   10   ns

TIMING DIAGRAM

B leads A for clockwise shaft rotation, and A leads B for counterclockwise rotation viewed from the shaft side of the encoder.

PIN-OUT

PIN DESCRIPTION
1 Ground
2 Index
3 A channel
4 +5VDC power
5 B channel

Additional Information

Product Notes

  • US Digital® warrants its products against defects in materials and workmanship for two years. See complete warranty for details.
  • Cables and connectors are not included and must be ordered separately.
  • For ordering information please configure the product and you'll see the Compatible Cables / Connectors section above.

Datasheets

Related

3D Model Downloads

Please configure your product first to download a 3D model.
(Note: The formats below will become links if there are 3D models available.)

    • SolidWorks Format
    • IGES Format
    • Parasolid Format
    • STEP Format

    Product Configurator

    For pricing, this product requires configuration.

    Begin by completing either Option 1 or 2 below. Questions? Contact our support team.

    Option 1: Configure the Product

    Use the configuration tool to provide information regarding your product needs. Not sure what to do or need additional assistance? Our support team is here to help.

    We recommend enabling Javascript when using the product configurator.

    Option 2: Enter the Product Part Number Directly

    If you know your product part number, enter it in the following field. The part number format looks something like this: E5-5000-394-IE-S-D-D-3...

    Our products are not currently available for direct online purchase. To place an order please contact us directly with your part number.

    For purchasing or volume discounts, please configure the part above, then use the completed part number and contact us!

    Feedback

    US Digital's mission is a commitment to quality and constant improvement. If you find an error to a product on this page, please let us know!